What To Know About Toilet Replacement
A Few Things To Remember While Replacing a Toilet
It’s important when considering the replacement of a leaking toilet in your Elbe, WA, home to understand how to do so correctly. Understanding how things fit together and where to check for water damage can help you mitigate future problems. Here are three things you should remember.
1. Check for Water Damage
During a toilet replacement, it’s important to check for water damage before installing a new unit. In most cases, this will occur around the water line in the wall or the flooring around the wax seal. If water damage is found a water damage restoration service can help. Let them know you have an old toilet that has been leaking and where you think the damage may have occurred. These professionals can also check for any additional damages as well.
2. Turn Off the Water Before Removal
Before removing the water lines from a leaking toilet it’s important to turn the water completely off and drain the unit. Doing so can help prevent accidental flooding. In most cases, there is a valve behind the toilet that can be turned tightly to the off position. The tank can then be drained by holding the flush lever down until any water in the reservoir is gone.
3. Ensure All Fittings are Tight
Another important step in toilet repair or replacement is to ensure that all the fittings fit snugly before turning the water back on. Doing this should help prevent any future leaks and subsequent water damage.
If you need to replace a leaking toilet it’s important to turn the water off before removing the unit. Once the toilet is out of the space you can look for water damage and have a restoration professional may any repairs that may be needed. When the new toilet is installed it’s important to check that all the fittings are correctly tightened in order to prevent future problems with leaking.