Recent Mold Remediation Posts

What to Expect During Mold Remediation

9/22/2019 (Permalink)

There is a plastic placed on a door used as a containment barrier when you have mold in your home Mold containment in an Orting, WA home

What to Expect During Mold Remediation

If you have found black mold in your Orting, WA, home, then it is important to have it removed quickly before it is able to spread throughout the building. This process can sometimes be a bit complicated and time-consuming, and you may not know exactly what to expect. While your home is being restored, the following steps will likely take place.

1. Inspection of the Home

Before they can begin work, the remediation company will need to inspect your home to determine the extent of the damage. During this stage, they will locate the mold growth as well as any water damage that may be contributing to the problem.

2. Containment of the Area

During mold cleanup, it is important to contain the area. If it is not properly blocked off, then mold spores can travel through the air and contaminate other places in the building. Tarps and negative air pressure can be used to do this. Vents will need to be sealed as well.

3. Cleaning and Sanitization

The next step is to thoroughly clean the area. Any visible black mold will need to be removed and the area should be sanitized to remove lingering mold spores. Air purifiers with HEPA filters may be used to remove mold from the air. Affected materials, such as drywall, carpeting and insulation may need to be removed. Protective gear should be worn during this process.

4. Thorough Drying

Once the area has been cleaned, it is important to let everything dry thoroughly. Black mold spreads quickly in moist environments, so any water that remains could cause it to return. Dehumidifiers can help speed this up.

5. Repairs and Restoration

The final step is to restore the building to its previous condition. If any materials were torn out, they will need to be replaced. If any of your belongings were affected by the mold, the remediation company can help restore those as well.
While the removal of mold can sometimes be difficult, a mold remediation company can get the job done right. They have the necessary training and equipment to remove this pesky fungus from your home.

Do You Use Bleach To Cleanup Mold? Here's Why You Shouldn't

7/23/2019 (Permalink)

Bleach is toxic

When It Comes to Fungus Cleanup Here Are Some Old Tricks

When it comes to fungus cleanup, there are a number of old tricks both homeowners and business owners use. A few of the more popular ones include the following:

  • Pour baking soda on the mold and scrub it away.
  • Use an antimicrobial treatment to kill the growth.
  • Paint over the mold with mildew-resistant primer.
  • Pour vinegar over the mold.
  • Kill the mold with borax.

The most popular trick of all, however, involves the popular household and laundry product, bleach.

The Popular Laundry Product Is Not the Answer

If you discover mold growth in your commercial building, the first product you're likely to reach for is the popular bleaching chemical. However, while many generations swear by this old fungus cleanup trick, the truth is that the chemical serves more as a band-aid than an effective remedy. In fact, in some cases, pouring the chemical over a mold-infested surface may exacerbate the problem.

3 Reasons You Shouldn't Use Bleach

There are three main reasons any experienced mold remediation specialist in South Hill, WA, will tell you not to use the popular laundry chemical to cleanup mold. The first is simple: It loses effectiveness over time. The chemical is essentially chlorinated water. Like with chlorinated water, if you leave the laundry product exposed to the air for a few days, the chlorine will evaporate, thereby rendering its cleaning properties ineffective.
The second reason you shouldn't use the product is because it can actually contribute to mold growth on porous surfaces. If you pour the chemical onto a porous surface, the chlorine will sit on the top while the water component will drip down, essentially feeding the growth.
Finally, bleach is toxic. You can avoid introducing a harmful chemical to your home, loved ones and pets by ditching the chemical and allowing a mold remediation specialist to come into your home and perform professional fungus cleanup.

3 Reasons To Use a Certified Remediation Company

5/27/2019 (Permalink)

When you use a certified mold inspection service, you know that you are getting quality work from a professional that you can trust.

There are many companies out there that are willing to inspect your Sumner, WA home for mold, so it can sometimes be difficult to determine which one is the right choice. However, there is one qualification that you should always look for – a certified mold inspector is the best option. Here are a few reasons why you should choose to use a certified company when you need mold removed from your home.

1. They Have Set Standards

The Institute of Inspection, Cleaning and Restoration Certification has set standards that companies must comply with. In order to qualify for IICRC mold certification, a company must demonstrate that they are willing to follow these rules. Because of this, you will always know what you are getting when you use a certified company.

2. Workers Are Consistently Trained

A certified mold remediation company must take the necessary steps to make sure that every worker is up to standard. This means that when you use a certified company, you will be working with well-trained individuals who have the proper skills and knowledge to get the job done right.

3. Insurance Prefer Certified Professionals

Because they must follow a standard procedure, many insurance companies will recommend a certified mold inspector during the claims process. When you use your insurance company’s preferred vendor, this can sometimes make the process go more quickly, allowing you to get your home back to its previous condition sooner. It can also result in a lower price if you are required to pay any portion of the repair costs.

If you believe that you have excessive mold growth in your home, it is important that you have it taken care of as quickly as possible without causing further damage. When you use a certified mold inspection service, you know that you are getting quality work from a professional that you can trust.

What To Do About Residential Mold Damage

3/8/2019 (Permalink)

A mold specialist has the knowledge and expertise to help you identify what the problem is.

What To Do About Residential Mold Damage 

Mold removal is a careful and efficient process. By removing all growth spores and restoring the parts of your home that were contaminated, you can feel confident in a mold-free home. When you first find mildew in your home, it’s best to create an action plan to prevent the fungi from spreading to other parts of your house. Here are three steps you can take to get started on the process.

1. Identify a Potential Problem

Mold isn’t always easy to spot. Sometimes mildew hides in dark, damp places that are hard to get to. A few common areas where mold can grow in the home in Sumner, WA include the following:

  • Basements
  • Showers
  • Kitchens
  • Crawlspaces

These areas are often warm and humid, which is the perfect environment for fungi. If you notice any strange odors, weird spots, or bulges, you are likely dealing with mold. Keep an eye on these areas. Sometimes mold problems are much bigger than they seem because spores can spread underneath floorboards, walls, and ceilings.

2. Get an Inspection

A mold specialist has the knowledge and expertise to help you identify what the problem is. Once the root and extent of the issue are discovered, the professional can give you valuable advice and aid concerning what to do next.

3. Create a Mold Removal Plan

Once the mold is identified, the remediation process should begin as quickly as possible. Mold can spread in as little as 48 hours; however, you can take extra measures to contain the growth. You might be dealing with extensive black mold removal or other types of fungi remediation, but the process can go smoothly and quickly.

Once the restoration process is complete, your home can look and smell mold-free. Mold removal isn’t a difficult process, and you can receive professional aid every step of the way. Before you know it, residential mold will no longer be an issue you deal with.

Why Does the Break Room Refrigerator Smell Like Mold?

2/19/2019 (Permalink)

Fridge Mold

Break room refrigerators in Puyallup, WA, are important amenities, and they help people stay well-fed all day long. Unfortunately, the refrigerators in break rooms can sometimes develop a moldy, unpleasant smell. Fridge mold is a common problem that can be fixed with a few good cleaning habits:

  • Clean out food on a weekly basis.
  • Make policies that disallow food staying in the refrigerator over the weekend.
  • Encourage people to label and date all food items.

These practices can help prevent that funky smell from developing in Puyallup, WA. Discouraging mold growth before it begins is the best way to avoid this problem in the first place.

Food Goes Bad Within Just a Few Days

All kinds of food can begin to spoil within just a few days of being stored. Fresh fruits and vegetables are likely to spoil first. Green salads, fruit plates, and crudité platters should be promptly disposed of to prevent them from beginning to rot inside the refrigerator. Before long, that mold smell may start to develop. 

Cooked food can last a little longer, but not much. Its freshness begins to break down after two or three days. This can include leftover takeout as well as food prepared at home. Labeling food with a date and name can help keep people accountable for the food they store in the shared refrigerator. Fridge mold often begins with prepared food that has been stored too long.

Condiments, peanut butter, and other similar items also eventually go bad. If no one is using these items, they should be removed from the fridge. If a name and date label is present on the condiment, check with the employee and encourage them to clean it out. This can help cut down clutter as well as bad smells. 

Mold Should Be Disinfected

Professionals can help with disinfecting the fridge in the break room. Letting experienced cleaners assist with this process may help get rid of fridge mold and its unpleasant smell. 

Don't Hesitate on Black Mold Remediation

2/19/2019 (Permalink)

Mold damage in a home

Black Mold Remediation

Mold damage in home or commercial mold damage can be tricky if left alone and untreated.

It can also be tricky if it's treated without care or knowledge. Mold growth can spread. The spores can move from one piece of wood to another. This condition could lead to dry rot. Dry rot occurs when the wood that supports the home or business starts to decay because of the extensive mold damage. This dry rot damage could lead to a potential rebuild of the dwelling in question.

Mold in home or commercial mold damage may seem like a quick fix at the first sight. The fungus and mildew though should provide valuable hints to an expert on how to contain the spread of the spores and how to keep it from occurring over and over again.

The remediation provided for a specialist could be the difference between mold continuing to spread deeper into the wood structures. It could also be the difference between eradicating the fungus, mildew and smelly odor once and for all.

Mitigation is the lessening of the damage seen with mold. That involves things like deodorization to remove the funky aroma. The smelly odor isn't something customers want to endure during a commercial mold damage scenario. It's also nothing a mold in home customer wants to take to bed with them, either. Deodorization is the icing on the cake to returning things back to normalcy. That's why mitigation by a professional is crucial in the early stages. It's not just the appearance of mold that can wreak havoc.

Give us a call at (253) 848-0800 if your home or business has mold damage.

Black Mold – Color, Smell and Appearance

1/21/2019 (Permalink)

Mold can be extremely difficult.

3 Aspects of Black Mold

Mother nature employs mold to breakdown natural materials in order to clear the land and open the way for new life. Dead trees, fallen leaves, and even animal carcasses can quickly become covered in mold – and that is a good thing. But when mold moves indoors in Puyallup, WA, it can become a danger to human health, and that is not a good thing. To protect your family, have a mold inspection by a certified mold remediation team at the first sign of the unsightly fungus. The team can generally look for these three things.

1. Color

At first glance, asking if the mold is black appears to be a nonsensical question, but it is not as ridiculous as it first seems. Mold is a fungus that comes in many colors, and quite a few of those colors have been classified by the experts as black, or a species known as stachybotrys chartarum. The fungus mycotoxins thrive in dark places, but they can appear as red, yellow, green and even orange.

2. Smell

Like most other fungi, black mold has a distinctive smell, but unlike other types of fungus, the black smells very musty and more like mildew than having a sharp repellent odor. Because of the lack of a dangerous smell, most people need a mold inspection to find hidden black stachybotrys because they have no idea it is attacking their home.

3. Appearance

Often hidden inside of floors, walls, and ceilings, the rampaging fungus colonies thrive on moisture. That may explain why they appear as velvety and slimy at the same time. However, like other types of house mold, the black variety spreads quickly into patches of soft-looking colonies that eat their environment until they have grown puffy enough to release spores into the air.

Consider having a mold inspection if there is any chance your home has been invaded by mold. That is the best way to guarantee it is not the black type you are fighting. The professionals can quickly assess the issue and address any concerns you may have.

You Never Expected Mold to Be so Costly

9/9/2018 (Permalink)

Once the mold has been located and identified, mold removal can begin.

The first evidence of mold is usually visual. Tiny spots appear on a wall and you try to clean them like dirt. Eventually, they spread, and you are forced to admit that you have a mold problem. You don’t want to spend a lot of money on mold removal, so you start considering other options.

• If you find a way to clear up this bit of mold, is the problem solved?
• Should you get some mold test kits and do your own inspection?
• Is there anyone out there who will diagnose your problem inexpensively?

The Cost of Mold Inspection Does Not Improve With Time

Bringing in a certified mold inspector is your best option. Expect a basic home inspection to cost up to $600 or more depending on the magnitude of your mold problem. Procrastination can only make the inspection and subsequent mold removal more expensive.

Another expense to consider is the cost to repair damage caused by the inspection. To find hidden mold, the inspector may need to open walls, woodwork and ceilings.

The Cost of Removing Mold Can Be Astronomical
Imagine a home in Puyallup, WA. that has so much mold that black mold removal isn’t financially viable. The only other available course of action would be to destroy the mold by incinerating the building. Most mold problems are not this extreme, but it is common for homes with serious mold problems to cost tens of thousands of dollars for removal and subsequent repair. These costs would not be necessary if the mold problems were recognized and addressed in a timely manner. Perhaps spending a few hundred dollars for a prompt mold inspection isn’t such a bad idea.

The Time Has Come to Remove the Mold

Once the mold has been located and identified, mold removal can begin. Mold infestation is a common problem, so you can expect to find mold specialists nearby. They will finish the job that the inspector started, and your home will return to a mold-free living space. For more information, visit

Things You Didn’t Know About Black Mold

5/13/2018 (Permalink)

The sight of black mold can incite dread, but how much do you know about this pervasive home pest? Also known as Stachybotrys chartarum, this mold can wreak havoc on a Puyallup, WA, home. To help deal with it, learn more facts about this frustrating infestation and a few pointers for mold remediation.

Where There’s Water, There’s Mold

You’re more likely to find black mold infestations where you have standing or saturated water. This mold requires moisture to thrive and grow, so any places where you have a leak or other indoor moisture and condensation issue are ripe grounds for mold growth. To keep your home as mold-free as possible, keep your home as dry as possible. If you’re not certain whether you have mold, follow the source of any musty odors or try a home testing kit.

It Feeds on Organic Materials

Mold can’t replicate on inorganic materials such as stone or plastic, so why do you see it growing on stone walls or underneath linoleum tile? It’s the organic materials associated with these surfaces that provide fertile breeding grounds. Mold can feed on many materials:

• Drywall
• Floor and tile glue
• Curtains
• Upholstery
• Paint
• Wood

Numerous other surfaces can be vulnerable, not to mention any food or plants left exposed in an area riddled with black mold spores. Dispose of any mold-infested organic matter immediately before the spores have a chance to spread.

It’s All Around You

When you undertake mold cleanup, your first goal may be to completely eradicate the spores from your location. Unfortunately, that’s impossible. Mold spores are persistent in almost any environment and constantly surround you. The best you can do for mold remediation is to deprive these mold spores of the moisture they need to grow into a full-on mold infestation. You may need to consult a professional on mold removal and prevention, but your best bet is to always remain vigilant and remove the conditions that lead to mold growth.

For more information, please visit us at

3 Common Questions About Mold Growth

4/16/2018 (Permalink)

When it comes to mold growth in Puyallup, WA, it can be difficult to know what exactly you’re dealing with and how to deal with it. Below are three common questions people face when facing mold problems.

1. What Is Mold?

Simply put, mold is fungus. There are many types of mold, and they exist everywhere. When it comes to the mold that is bad for you, its technical name is stachybotrys chartarum, which is commonly referred to as black mold. The spores of mold are microscopic, so you won’t always have visual evidence of the presence of mold. Mold will generally have a musty smell, which can help you become aware of its presence.

2. What Makes Mold Grow?

Generally, mold grows because of moisture. High humidity can exacerbate mold problems, helping it form in as little as 48 hours. Not only does moisture come from high humidity, but it can also come from water damage, such as leaky pipes or roofs or condensation. Also, mold growth is encouraged in dark, warm environments.

3. What Is the Difference between Regular Mold and Problematic Mold?

The presence of most mold is usually visible to the naked eye. Mildew, a type of mold that isn’t as problematic and can be cleaned away, is usually gray or white. However, problematic mold is usually black or green with a “fuzzy” texture. However, even if only one of these types of mold appears to be present, it’s possible that the other is present as well, since they can go hand in hand.

Even if you have a good understanding of mold growth, it can still be a good idea to contact a professional and let them deal with remedying the problem. Additionally, stay away from the mold area, turn off air conditioners and fans and do not attempt any sort of cleaning.

For more information, please visit us at

Knowing Mold's Favorite Areas

3/28/2018 (Permalink)

Mold is an important part of our world, but only in certain places – most Puyallup, WA, residents would likely agree with this sentiment. While it can provide many health and environmental benefits, mold can become quite the nuisance when found indoors. Mold damage can be an entirely different story. Check out the following three places where mold is most commonly found in the home.

1. The Basement

If you're proud of your downstairs lair, you are not alone. The basement is the perfect place for sports gatherings, family game nights, and any other leisurely activity, but it can also provide the ideal setup for mold and mildew growth. Any place with oxygen and moisture – which basements often contain – can give mold all the ingredients it needs to spread. Drywall and organic materials can also be particularly susceptible to a fungal infestation.

2. The Attic

It's the place you put all of your forgotten knick-knacks, and it's also the place you likely forget about. In addition to holding your stashed-away belongings, attics can also become home to mold growth. No matter what climate you live in, a leaky roof or extreme temperatures can lay the foundation for mold damage. Most of the time, homeowners discover that faulty ventilation allowed for mold to move right in.

3. The Bathroom

Probably the most notorious for housing mold, bathrooms can easily trap moisture and humidity. Even with a regular cleaning routine, it is easy for mold to move right back in. However, cleaning mold from surfaces such as a tub or sink can be much simpler than, for instance, wallpaper or other permeable materials.

Regardless of the source, finding mold in your own living space can take a considerable amount of time to tackle. By calling on a professional to help, you can speed up this process and have peace of mind that mold damage is no more.

For more information, please visit us at

Does Your Home Have A Mold Problem?

2/25/2018 (Permalink)

Mold can spread through a home in as little as 48 hours.

Microscopic mold spores naturally occur almost everywhere, both outdoors and indoors. This makes it impossible to remove all mold from a home or business. Therefore, mold remediation reduces the mold spore count back to its natural or baseline level. Some restoration businesses advertise “mold removal” and even guarantee to remove all mold, which is a fallacy. Consider the following mold facts:

  • Mold is present almost everywhere, indoors and outdoors.
  • Mold spores are microscopic and float along in the air and may enter your home through windows, doors, or AC/heating systems or even hitch a ride indoors on your clothing or a pet.
  • Mold spores thrive on moisture. Mold spores can quickly grow into colonies when exposed to water. These colonies may produce allergens and irritants.
  • Before mold remediation can begin, any sources of water or moisture must be addressed. Otherwise, the mold may return.
  • Mold often produces a strong, musty odor and can lead you to possible mold problem areas.
  • Even higher-than-normal indoor humidity can support mold growth. Keep indoor humidity below 45 percent.

If your home or business has a mold problem, we can inspect and assess your property and use our specialized training, equipment, and expertise to remediate your mold infestation.

If You See Signs of Mold, Call Us Today – (253)848-0800.

Mold Damage Shouldn't Be Long Term Problem

2/25/2018 (Permalink)

Battling mold could take forever if the correct steps aren't utilized.

Anyone who has dealt with mold removal might remember it can and will return if not addressed correctly the first time. Remediation of the mildew, fungus and black mold the first time around can save a home or business owner tons of time and money. It's nothing that should drag on forever. The solution is as simple as allowing a highly trained expert to diagnose the issue and remove the threat at the source.

Mold growth shouldn't have to be anything longer than a short-term problem. In fact, mold removal in the right hands isn't a long-term issue. Experts who know the gravity of the situation can carefully secure any mold damage and provide remediation for mold in home or commercial mold damage victims.

SERVPRO of Sumner/Puyallup is a locally-owned franchise with national resources that helps homeowners to overcome mold, water, and fire damage at as little cost and strain as possible. Give us a call at (253) 848-0800.

What happens when a mold damage professional looks at a dwelling?

2/25/2018 (Permalink)

A restoration company can assess the situation.

They can properly diagnose the type of mold that has surfaced. Is it black mold? Could it possibly lead to dry rot? Does the smelly odor need deodorization, or will it go away alone? These are questions the general public doesn't typically have answers to. These are questions a professional restoration company can usually answer within their first assessment of seeing the mold growth.

Sometimes mold growth isn't even visible. Mold growth behind wall is a completely different beast to tackle. It might just leave an obnoxious smelly odor for residents to deal with. A true professional need to be consulted to find the mold growth behind wall.

A restoration company can dig to find the root of the issue. Unlike general consumers, a professional can figure out what started the problem. They can identify the type of mold, so the source is contained. Was it a leaky pipe within the interior of the home? Is the air condition leaking? Is excessive humidity and moisture leading to black mold? Does the shower need to be revamped? Is there enough proper ventilation in certain areas of the home? These could all be present whether it's mold growth behind wall, visible fungus or mildew.

SERVPRO of Sumner/Puyallup is a locally-owned franchise with national resources that helps homeowners to overcome mold, water, and fire damage at as little cost and strain as possible. Give us a call at (253) 848-0800.

Why doesn't everyone utilize a restoration company for mitigation and remediation?

2/25/2018 (Permalink)

Don't Wait to Call

Mold in home and commercial mold damage victims often wait or don't believe the mold damage is that bad. Mold removal might seem like an easy task or something consumers can look up with "how to" videos. Maybe mold growth behind wall isn't visible and they don't realize the mold growth even exists or is even spreading. The mitigation, when handled by a professional, can bring a building completely back to where it was before the mold occurred.

Black mold and many other types of mold can be removed at the source of the problem instead of just where it has populated. Deodorization can also help with the mold removal to alleviate the awful smell associated with the spores. A professional can at least assess the mold. This way the damage can be located and controlled. The source of the problem can be fixed. The long term spread of mold can be corralled. Ultimately, that's what most home and business owners hope to achieve.

SERVPRO of Sumner/Puyallup is a locally-owned franchise with national resources that helps homeowners to overcome mold, water, and fire damage at as little cost and strain as possible. Give us a call at (253) 848-0800.

Mold In Hard-To-Reach Places

5/18/2017 (Permalink)

Mold gets behind walls, under crawl spaces, into tiny cracks and corners, and other unreachable places in a home with relative ease.

Mold can get behind walls, under crawl spaces, into tiny cracks and corners, and other hard-to-reach places in a home with ease. This is what has allowed mold to survive throughout the planet's history: it seeks out places where little else can grow, takes root there, and spreads out as far as it can. While this ability is great for the mold, it is bad for your home. Mold eats away at building materials and can even cause health problems for residents. SERVPRO technicians make sure to check these important hard-to-reach places in most mold remediations, in case a colony has taken root without the homeowner noticing.

Under Carpets 
Carpeting is especially susceptible to mold damage. There are a few reasons why carpeting fosters mold growth. First, carpets are absorbent and can store spilled liquid for extended periods of time, giving the mold a suitable and lasting source of moisture to survive on. Second, the fibers and weaving used in most types of carpeting make an excellent home for growing mold spores. We use thermal, chemical, and sometimes physical checks to determine if mold has worked its way under any carpeting.

Behind Walls 
Many of the largest mold colonies SERVPRO technicians tackle are located behind walls or underneath floors. These areas are static and dark, giving mold a perfect place to grow if any moisture is present. Our advanced detection equipment allows us to discover mold in places where you might not be able to find it.

In Cracks And Corners 
Mold does not need much space to start growing, which can make it a formidable opponent in constricted spaces like wall cracks and deep corners. We stock an extensive supply of tools and materials specially designed to reach these colonies, so don't worry if you find the mold in a seemingly impossible place. We’ve got it covered.

SERVPRO of Sumner/Puyallup is a locally-owned franchise with national resources that helps homeowners to overcome mold, water, and fire damage at as little cost and strain as possible. Give us a call at (253) 848-0800.